DC - DC CONVERTER MODULE
DC-DC Boost 5v 600ma Output Convertor Module
|Input Voltage||5 V|
|Working Frequency||50 Hz|
5V DC regulated output from 0.9 to 5V battery input. Current up to 300mA from single AA battery and up to 600mA from 2x AA battery input with 96% efficiency.
USB-Female connector output for powering various 5V operated USB devices from battery.
- LED indicator
- Easy to connect Low Cost
- Work from battery voltage as low as 0.9V, allowing you to maximise battery use
MT3608 2A Max DC-DC Step Up Ultra Small Power Module
|Input Voltage||2 V ~ 24 V|
|Maximum output current||2 Amp|
|Maximum output voltage||Greater than 5 V - 28 V|
|Product size||36 mm 17 mm 14 mm|
By keeping pace with the current market demand, we are presenting an assorted series of MT3608 2A Max DC-DC Step Up Ultra Small Power Module.
5A 75W XL4015 LED Module DC-DC Converter
|Input Voltage||DC 4.0 ~ 38V|
|Output Voltage||DC 1.25V ~ 36V|
|Output current||Max 5 A|
|Output power||75 W|
|Voltmeter error||+/- 0.05V|
|Measure range||0 ~ 40 V|
|Conversion efficiency||up to 96%|
The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. The board uses connection terminal for easy wiring.
LM2596 DC-DC Converter Step Down Power Module
Minimum Order Quantity: 50 Piece
|Size||48 * 23 * 14 mm|
|Load regulation||+/- 0.5%|
|Voltage regulation||+/- 2.5%|
|Operating temperature||-40 deg C to 85 deg C|
This is an LM2596 DC-DC Converter Step Down Power Module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Freeduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W), please add a heat sink on it.
Arduino Dc-dc Boost Converter
|Input Voltage||10-32 V|
|Output Voltage||12-35 V|
|Full load temperature rise||45 deg c|
|Voltage regulation||+/- 0.5%|
|Output Current||10 A|
|Dimension||65x 57 x 25 mm|
|Operating Temperature||-40 deg c to +85 deg c|
|Dynamic response speed||5% 200uS|
|Input Current||16 A|
- Module Properties: non-isolated step-up module (BOOST)
Note: The boost module input voltage can not be higher than the output voltage, the output stable at the set value).
XL6009 DC to DC Stepup Ultra Small Power Module
Minimum Order Quantity: 100 Piece
|Power||3v - 32v to 5v - 35v|
|Output Voltage||3v - 32v to 5v - 35v|
- Delivery Time: 2-4 days
|Protocol||Support CAN 2.0B protocol|
|Frequency||8 MHz crystal oscillator|
|Dimension||40 x 28 mm|
XL6009 DC-DC Boost Converter Module
|Input Voltage||5 V|
XL6009 regulator is a wide input range,current mode, DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured as either a boost, flyback, SEPIC or inverting converter. The XL6009 built in N-channel power MOSFET and fixed frequency oscillator, current-mode architecture results in stable operation over a wide range of supply and output voltages.The XL6009 regulator is special design for portable electronic equipment applications.
Need a boost? Using the XL6009 switching boost regulator IC this module can take an input voltage of between 5 and 32V DC and convert it to between 4 and 38V DC.
When using these modules remember that the output current will be a lot less than the input current, (remember - W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W. .
To be honest these modules should be used when you don''t have any other option, or if you only need a higher voltage at a low current. Otherwise it would be prudent to re-consider the power needs of your project.