Raspberry PI Board & Accessories

• A 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (~10x the performance of Raspberry Pi 1)
• Integrated 802.11n wireless LAN and Bluetooth 4.1
• Complete compatibility with Raspberry Pi 1 and 2.

Description: This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go. The board itself is tiny, making it perfect for mobile or other applications where size and weight are important. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.

• Socket With Shutter: No
• Color: Green
• Wireless: 2.4 GHz 802.11 n wireless LAN
• Video and Audio: 1080P HD video and stereo audio via mini HDMI connecto
• Storage: MicroSD card
• SOC: Broadcom BCM2835

• A 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (~10x the performance of Raspberry Pi 1)
• Integrated 802.11n wireless LAN and Bluetooth 4.1
• Complete compatibility with Raspberry Pi 1 and 2.

• The Raspberry Pi 3 Model A+ extends the Raspberry Pi 3 range into the A+ board format.
• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• 512MB LPDDR2 SDRAM
• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
• Extended 40-pin GPIO header
• Full-size HDMI
• CSI camera port for connecting a Raspberry Pi Camera Module
• DSI display port for connecting a Raspberry Pi Touch Display
• 4-pole stereo output and composite video port
• Micro SD port for loading your operating system and storing data

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• 1GB LPDDR2 SDRAM
• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
• Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
• Extended 40-pin GPIO header
• Full-size HDMI
• CSI camera port for connecting a Raspberry Pi camera
• DSI display port for connecting a Raspberry Pi touchscreen display
• 4-pole stereo output and composite video port
• Micro SD port for loading your operating system and storing data
• Power-over-Ethernet (PoE) support (requires separate PoE HAT)

• Pinheaders for connecting with the RPi
• UART interface: easily connects to UART modules such as RS232, RS485, USB TO UART, etc.
• 8I/Os interface: easily connects to modules controlled by I/Os, such as 8 Push Buttons, Logic Level Converter, Mix Board, etc.
• SPI interface: easily connects to SPI modules such as AT45DBXX Dataflash, L3G4200D Board, etc.
• I2C interface: easily connects to I2C modules such as PCF8574 Expansion Board, PCF8563 RTC Board, LSM303DLHC Board, etc.
• Character LCD interface: for connecting character LCDs like LCD1602
• Power indicator
• User LEDs
• User Keys
• RTC battery holder
• PCF8563: onboard RTC chip
• 32.768K crystal: RTC crystal
• CP2102: onboard USB TO UART chip, for debugging
• CP2102 jumper
• RTC jumper
• User LEDs jumper
• User Keys jumper

• Expand common GPIO through amphenol connector
• Expand common GPIO through Female Header Connector
• Set aside a large amount of welding hole

• I2C amphenol connector
• Female Header Connector
• SPI amphenol connector
• SPI Female Header Connector
• Serial port amphenol connector
• Serial port Female Header Connector
• 3.3V Vcc
• 5V Vcc

• A 900MHz quad-core ARM Cortex-A7 CPU
• 1GB RAM

• 100 Base Ethernet
• 4 USB ports
• 40 GPIO pins
• Full HDMI port
• Combined 3.5mm audio jack and composite video
• Camera interface (CSI)
• Display interface (DSI)
• Micro SD card slot
• VideoCore IV 3D graphics core

Casing for Raspberry PI 3 Model B

The official Raspberry Pi 3 case in a stunning Red/White design

• Optional clip-on lid provides protection but can be removed if using a HAT
• All primary ports (including microSD) accessible
• Removable side plate allows access to those wonderful GPIO pins
• Snug and secure fit protects your Pi while looking great!
• Anti-slip feet keep your Raspberry Pi stable
• Power and activity lights still visible through the end of the case

HDMI Cable for Raspberry Pi

• The Raspberry Pi Camera Module is ideal for HD videos and still photography. You can also try time-l

• The Raspberry Pi 3 case 
• All primary ports (including microSD) accessible
• Snug and secure fit protects your Pi while looking great!
• Anti-slip feet keep your Raspberry Pi stable
• Power and activity lights still visible through the end of the case

• Capacitive touch control, supports up to ten-points touch
• When works with Raspberry Pi, supports Raspbian, Ubuntu, Windows 10 IoT, single touch, and driver free
• When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
• Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
• Supports BB Black, comes with Angstrom image
• HDMI interface for displaying, USB interface for touch control
• Back light control to lower power consumption

• Comes with back holder, 30°/45° tilt angle
• Features mounting holes for Raspberry Pi 3B/2B/B+/A+/B, BB Black, Banana Pi