Dilson Enterprises

• GSM Antenna .

Installed in the MLX90614 are a low-noise amplifier and 17-bit ADC and powerful DSP. This enables the high-accuracy and resolution of the thermometer. The MLX90614 comes factory calibrated with a digital SMBus output that gives full access to the measured temperature in the complete temperature range(s) with a resolution of 0.02°C.

The digital output can be configured to be PWM. The 10-bit PWM is configured to continuously transmit the measured temperature in the range of -20 to 120°C, with a 0.14°C output resolution.

• Frequency range(MHz): 1575.42
• Bandwidth(MHz):＞5MHz
• Peak Gain(dBi): 3 dBi Based on 5×5cm ground plane
• Axial Ratio(dBi): 3
• Input Impedance(Ω): 50
• Maximum input power(W): 5
• Consumption Electric: <11mA
• Supply Voltage: 2.8~3.8

• Frequency range(MHz): 1575.42
• Bandwidth(MHz):＞5MHz
• Peak Gain(dBi): 3 dBi Based on 5×5cm ground plane
• Axial Ratio(dBi): 3
• Input Impedance(Ω): 50
• Maximum input power(W): 5
• Consumption Electric: <11mA
• Supply Voltage: 2.8~3.8

NRF24L01P + PA + LNA wireless module core Norway NORDIC company''s latest high-performance wireless
Digital transmission chip NRF24L01 + with the Division of Professional Design professional full two-way RF power amplifier high power PA and LNA chip, RF switches, bandpass filters, etc., makes effective communication distance greatly expand.

RF part, the Secretary has done a lot of optimization matching debugging, the emission efficiency to achieve the highest harmonic minimum

NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches a minimum, while not susceptible to interference from other devices, greatly Uploader
High stability of the work.

NRF24L01P + PA + LNA wireless module integration is extremely high, the size of only 41mm * 15.5mm, convenient embed.

The subject of the auction is a set of elements needed to perform the modification of the Raspberry Pi Zero W tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional.

This is a tiny 2.4 Ghz Foldable 3dbi WiFi antenna, which provides broad coverage. It is a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b and 802.11g wireless LANs.

This flexible antenna features a tilt-and-swivel SMA connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios that are equipped with SMA connectors including D-Link, Linksys and others.

This 2.4GHz 3.2dBi Gain indoor antenna provides high gain and provides tilt and swivel functions for full flexibility. This antenna can be used for a variety of other applications within the specified frequency range. When used as the access point, the antenna is ideally located at the center of the coverage area

This antenna mates nicely with the SMA female connector.

• Frequency range(MHz): 1575.42
• Bandwidth(MHz):＞5MHz
• Peak Gain(dBi): 3 dBi Based on 5×5cm ground plane
• Axial Ratio(dBi): 3
• Input Impedance(Ω): 50
• Maximum input power(W): 5
• Consumption Electric: <11mA
• Supply Voltage: 2.8~3.8