ESP8266 Wifi Module
ESP8266 ESP-13 based WiFi Module
|Model Number||ESP8266 ESP-13|
|Form Factor||18mm x 20mm|
Detailed features list
- Syntax highlighting LUA and Python code
- Code editor color themes: default, dark, Eclipse, IDEA, Visual Studio
- Undo/Redo editors features
- Code Autocomplete (Ctrl+Space)
- Smart send data to ESP8266 (without dumb send with fixed line delay), check correct answer from ESP8266 after every lines.
- Code snippets
- Detailed logging
ESP8266 ESP-12 Serial WiFi Wireless Transceiver SMD Module
|Standby current||Less than 1mA|
|Model number||ESP8266 ESP-12|
- Item Code: ESP12
- Pay Mode Terms: T/T (Bank Transfer)
- Delivery Time: 4 - 6 DAYS
ESP8266 ESP-07 WIFI Transceiver Wireless Module
|Standby current||Less than 1mA|
- It run LWIP
- 802.11 bgn
- WIFI Direct (P2P),SOFT-AP
- Built-in TCP/IP
- The AT command is perfect,efficient,concise
- Support three modes: AP, STA and AP+STA coexistence mode
Esp8266 Esp-12 Module
|Working Frequency||50 Hz|
|Voltage||5V or 3.3V|
|Transmission Rate||101-150 Mbps|
|Model Number||ESP8266 ESP-12|
Minimum Order Quantity: 20 Piece
|Brand||AI THINKER , DOIT|
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
They are collectively referred to as “ESP-xx modules”.
- Item Code: ESP12F
ESP 8266 ESP12F Serial Wifi Wireless Transceiver Module
|Operating Temperature||-20~70 Degree C|
ESP8266 ESP32 Wroom Module
|Model Number||ESP8266 Wroom ESP32|
|Features||Wifi, Bluetooth,Custom Firmware|
|Working Frequency||2.4 Ghz to 2.5 Ghz|
ESP8266 ESP-03 Wifi Transreceiver Wireless Module
NODEMCU LUA ESP8266 ESP-12E With CP2102
|Working Temperature||-40 to 125 deg C|
|Voltage||3 - 5.50 volts|
ESP 8266 ESP12E Serial WiFi Wireless Transracevie Module
NodeMCU Lua ESP8266 ESP-12E Module with CH340
Minimum Order Quantity: 10 Piece
|Working Temperature||-40 Degree C ~ + 125 Degree C|
|Input Power||4.5V ~ 9V|
ESP-01 Serial Wifi Wireless Transceiver Module
|Frequency||2400 - 2483.5 MHz|
ESP8266 ESP 32 Wifi Bluetooth Development Board
Serial Wifi Server - Hlk-wr02
|Number Of Ports/Channels||12|
|Compatible Brand||Dell, HP|
HLK-WR02 serial server features:
1 can achieve RS232 or RS485 to WIFI, RS232 or RS485 to RJ45, RJ45 to WIFI transparent transmission of data, ensure the stability of data transmission.
2 can realize Ethernet to WIFI transparent transmission module, can realize the wireless LAN cable to wireless data transformation function.
3 support AP STA mode of operation at the same time, the module can be used as AP for wireless terminal, and at the same time as the addition of STA to the other wireless routing equipment.Factory direct sales, ensure the technical support service, can also OEM and ODM
The characteristics of the product:
1 onboard UART WIFI core module, contains all of the features of this module, please refer to the module description.
2 support the RS232 interface, and computer pin definitions consistent common port (needle)Automatic switch RS485 interface
3 extremely low latency
4 DC 5 - 18V ultra wide voltage input, can provide 2A current DCDC power chip LM2576HVS, guarantee the reliability of the system.5 DCDC power chip can provide 75% ~ 85% efficiency, suitable for use in battery powered systems.
6 RS485 and RS232 interface
7 Reload heavy initial configuration button, also need not worry again set the wrong. (working status, press 3-5 second load release can load the default setting and automatic restart)
8 rich status indicator Power Ready Link RXD TXD
9 DC3.5 power socket, reservation access 2.54 spacing hole can choose
10 power supply, serial cable, cable, convenient for customers to use.
Home Automation, IOT, Industrial Control, Medical Surveillance, Phone control over Wi-Fi and so on.