Dilson Enterprises

• Syntax highlighting LUA and Python code
• Code editor color themes: default, dark, Eclipse, IDEA, Visual Studio
• Undo/Redo editors features
• Code Autocomplete (Ctrl+Space)
• Smart send data to ESP8266 (without dumb send with fixed line delay), check correct answer from ESP8266 after every lines.
• Code snippets
• Detailed logging

• It run LWIP
• 802.11 bgn
• WIFI Direct (P2P),SOFT-AP
• Built-in TCP/IP
• The AT command is perfect,efficient,concise
• Support three modes: AP, STA and AP+STA coexistence mode

The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.

It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.

ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.

Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.

ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.

They are collectively referred to as “ESP-xx modules”.

The ESP-01 is a popular serial Wi-Fi wireless transceiver module based on the ESP8266 chip. It provides Wi-Fi connectivity to microcontrollers and other embedded systems, enabling wireless communication and internet connectivity. Here's a description of the ESP-01 serial Wi-Fi wireless transceiver module:

1. ESP8266 Chip: The ESP-01 module is built around the ESP8266 chip, which is a highly integrated Wi-Fi SoC (System-on-a-Chip). The ESP8266 chip combines a microcontroller unit (MCU) with a Wi-Fi radio, making it capable of handling both processing tasks and wireless communication.

2. Serial Communication: The ESP-01 module utilizes serial communication for data transmission and control. It features a UART (Universal Asynchronous Receiver-Transmitter) interface, allowing the module to communicate with a host microcontroller or system via simple serial commands.

3. Wi-Fi Connectivity: The module supports 2.4GHz Wi-Fi connectivity, compliant with the IEEE 802.11b/g/n standards. It allows your project to connect to Wi-Fi networks, access the internet, and communicate with other devices over the network.

4. Flash Memory: The ESP-01 module includes onboard flash memory that can be used for storing firmware, web pages, or other data files. The memory can be accessed and manipulated using the firmware running on the ESP8266 chip.

5. AT Command Set: The ESP-01 module supports an AT command set, which allows you to configure its settings and behavior using simple text-based commands. This makes it easy to integrate the module into existing projects and interact with it using familiar AT commands.

6. GPIO Pins: The ESP-01 module provides a limited number of GPIO (General Purpose Input/Output) pins that can be used for interfacing with external components, sensors, or actuators. These pins can be configured as digital inputs or outputs, allowing for basic I/O operations.

7. Power Supply: The module typically operates at 3.3V and requires a stable power supply capable of providing sufficient current. It can be powered directly from the 3.3V pin of an Arduino or other microcontrollers. However, it is important to note that the ESP8266 chip may have higher power requirements during data transmission.

8. Compatibility: The ESP-01 module can be used with various microcontrollers and development boards, including Arduino. It can be connected to a host system using serial communication (UART) and easily integrated into projects requiring wireless communication and internet connectivity.

9. Application Areas: The ESP-01 module finds applications in a wide range of projects, including home automation, IoT (Internet of Things) devices, sensor networks, Wi-Fi-enabled smart devices, and more. It provides an affordable and compact solution for adding Wi-Fi connectivity to projects with limited space and power constraints.

The ESP-01 serial Wi-Fi wireless transceiver module offers a convenient and cost-effective way to add Wi-Fi connectivity to your projects. With its compact size, UART interface, and extensive software support, it has gained popularity in the maker community for enabling wireless communication and IoT applications.

The ESP8266 ESP12F is a serial wifi wireless transceiver module based on the ESP8266 system-on-chip (SoC). It operates on the 2.4GHz ISM band and can support wifi protocols such as 802.11 b/g/n. The ESP8266 ESP12F is commonly used as a low-cost and low-power solution for IoT and other wireless applications.

The ESP8266 ESP12F has a built-in microcontroller unit (MCU) which can be programmed using the Lua scripting language or the Arduino IDE. It also has a variety of GPIO pins, which can be used to interface with sensors, actuators, and other devices. Additionally, the ESP8266 ESP12F supports serial communication, allowing it to be easily integrated with other microcontrollers or computers.

The module has a maximum transmission power of 19.5dBm and can operate at data rates up to 72.2Mbps. It also supports power saving modes, which can be used to reduce power consumption in battery-powered applications. The ESP8266 ESP12F is a popular choice for a wide range of applications such as home automation, remote monitoring, and sensor networks.

The ESP8266 and ESP32 Wroom modules are small, low-cost, and low-power WiFi modules designed for Internet of Things (IoT) applications. They are both developed by Espressif Systems, a Chinese company that specializes in producing WiFi modules and development boards.

The ESP8266 module features a 32-bit RISC CPU with a clock speed of 80MHz and 4MB of flash memory for program storage. It supports the IEEE 802.11b/g/n wireless networking standard and has built-in support for TCP/IP networking protocols. The module operates on a voltage range of 2.5V to 3.6V and has a maximum power consumption of 170mA.

The ESP32 Wroom module is an upgraded version of the ESP8266 module and features a dual-core Tensilica LX6 CPU with a clock speed of up to 240MHz. It also has 4MB of flash memory for program storage and supports the IEEE 802.11b/g/n wireless networking standard, as well as Bluetooth Low Energy (BLE) connectivity. The module operates on a voltage range of 2.2V to 3.6V and has a maximum power consumption of 250mA.

Both modules can be programmed using the Arduino IDE or other development environments using the ESP8266 and ESP32 core libraries. They are widely used in various IoT applications, such as home automation, smart appliances, and industrial control systems, due to their low cost, low power consumption, and WiFi connectivity.

The NodeMCU Lua ESP8266 ESP-12E Module with CH340 is a development board based on the ESP8266 Wi-Fi module. It is designed for easy prototyping and development of IoT (Internet of Things) projects. Here's a description of the key features and components of this module:

1. ESP8266 Wi-Fi Module: The module is built around the ESP8266 Wi-Fi module, specifically the ESP-12E variant. The ESP8266 is a low-cost, low-power, and highly integrated Wi-Fi microcontroller with built-in TCP/IP protocol stack. It allows the NodeMCU module to connect to Wi-Fi networks and communicate with other devices over the internet.

2. Lua Programming: The NodeMCU module supports the Lua programming language, which simplifies the development process by providing a high-level scripting language for writing IoT applications. Lua scripts can be uploaded to the module and executed directly, making it easy to prototype and deploy projects.

3. CH340 USB-to-Serial Converter: The module is equipped with a CH340 USB-to-serial converter chip, which allows it to connect to a computer via USB. The CH340 chip handles the USB communication and provides a virtual serial interface for programming and debugging the module.

4. GPIO Pins: The NodeMCU module features several general-purpose input/output (GPIO) pins that can be used to interface with external components and sensors. These pins can be configured as digital inputs or outputs and can support various communication protocols such as I2C, SPI, and UART.

5. Analog Inputs: The module also provides a few analog input pins, allowing you to read analog sensor values or interface with analog devices.

6. Flash Memory: The NodeMCU module has built-in flash memory for storing Lua scripts, web pages, or other data files. This memory can be accessed and manipulated using the Lua programming language.

7. Power Supply: The module can be powered either via USB or an external power source. It operates at a voltage range of 3.3V, and there is a built-in voltage regulator to provide stable power to the module and connected components.

8. Programming and Debugging: The NodeMCU module can be programmed and debugged using the Arduino IDE or the NodeMCU firmware flasher tool. These tools provide a familiar programming environment and enable you to upload Lua scripts or firmware updates to the module.

9. Wi-Fi Connectivity: The ESP8266 Wi-Fi module on the NodeMCU supports Wi-Fi connectivity, allowing the module to connect to existing Wi-Fi networks or act as an access point. This enables communication with other devices or cloud services over the internet.

The NodeMCU Lua ESP8266 ESP-12E Module with CH340 offers a convenient and feature-rich platform for IoT prototyping and development. It combines the power of the ESP8266 Wi-Fi module, Lua scripting language, and a user-friendly development environment, making it a popular choice for building Wi-Fi-enabled IoT applications.

The ESP8266 ESP-03 is a Wi-Fi transceiver wireless module based on the ESP8266 chip. It is a compact and cost-effective module that provides Wi-Fi connectivity to microcontrollers and other embedded systems. Here's a description of the ESP8266 ESP-03 Wi-Fi transceiver wireless module:

1. ESP8266 Chip: The module is built around the ESP8266 chip, which is a highly integrated Wi-Fi SoC (System-on-a-Chip). The ESP8266 chip includes a microcontroller unit (MCU) and a Wi-Fi radio, allowing it to handle both processing tasks and wireless communication.

2. Wi-Fi Connectivity: The ESP8266 ESP-03 module supports 2.4GHz Wi-Fi connectivity, compliant with the IEEE 802.11b/g/n standards. It allows your project to connect to Wi-Fi networks, access the internet, and communicate with other devices over the network.

3. Transceiver Mode: The ESP-03 module can operate in both client and access point (AP) modes. In client mode, it can connect to existing Wi-Fi networks as a client device. In AP mode, it can act as a Wi-Fi access point, allowing other devices to connect to it.

4. Serial Communication: The module communicates with the host microcontroller or system through a serial interface. It utilizes UART (Universal Asynchronous Receiver-Transmitter) for serial communication, allowing data to be transmitted and received between the module and the host system.

5. GPIO Pins: The ESP-03 module provides a limited number of GPIO (General Purpose Input/Output) pins that can be used for interfacing with external components, sensors, or actuators. These pins can be configured as digital inputs or outputs, allowing for basic I/O operations.

6. Flash Memory: The module has built-in flash memory for storing firmware, web pages, or other data files. This memory can be accessed and manipulated using the firmware running on the ESP8266 chip.

7. AT Command Set: The module supports an AT command set, which allows you to control its functionality and configuration through simple text-based commands. This makes it easy to integrate the module into existing projects and interact with it using familiar AT commands.

8. Power Supply: The ESP8266 ESP-03 module typically operates at 3.3V. It requires a stable power supply capable of providing sufficient current to the module and any connected peripherals. Care should be taken to ensure proper power supply and voltage levels.

9. Integration with Arduino and Other Platforms: The ESP8266 ESP-03 module can be used with popular development platforms such as Arduino. There are libraries and resources available that enable seamless integration, making it easier to develop Wi-Fi-enabled projects.

The ESP8266 ESP-03 Wi-Fi transceiver wireless module provides a cost-effective and compact solution for adding Wi-Fi connectivity to your projects. Its small form factor, low power consumption, and extensive software support make it a popular choice for IoT applications, home automation, wireless sensor networks, and more.

The NodeMCU Lua ESP8266 ESP-12E with CP2102 is a development board based on the ESP8266 WiFi module. It is designed to be compatible with the Lua programming language and can be programmed using the NodeMCU firmware.

The ESP8266 module has a built-in WiFi module and can be used to create Internet of Things (IoT) applications and projects. The NodeMCU Lua ESP8266 ESP-12E board also includes a CP2102 USB-to-serial converter, which allows for easy programming and communication with the board using a computer.

The board has a compact size and includes 11 digital input/output pins, one analog input pin, and a UART interface for serial communication. It operates on 3.3V and can be powered using a USB connection or an external power source.

The NodeMCU firmware provides an easy-to-use programming interface and includes a range of built-in libraries for networking and other common tasks. The Lua programming language is simple and easy to learn, making it a popular choice for developing IoT applications.

Overall, the NodeMCU Lua ESP8266 ESP-12E with CP2102 is a versatile and cost-effective development board that is ideal for creating IoT projects and applications.

ESP32 (CP2102 Driver, 30 Pin) Wi-Fi + Bluetooth NodeMCU-32 Development Board) This development board is a powerhouse of power and connectivity. With robust Wi-Fi and Bluetooth capabilities, it opens up a world of possibilities. Its compact 30-pin design allows it to seamlessly integrate into various products, enabling endless creative options. What sets this board apart are its dual wireless modes. 

You can choose between AP, STA, or AP+STA modes, giving you the flexibility you need for your IoT endeavors. The inclusion of Lua programming support makes development a breeze, catering to both beginners and experts. For smooth computer connectivity, the board features a CP2102 USB-UART bridge, ensuring that you can work effortlessly with your computer. At the heart of this development board lies the powerful ESP32E chip, designed for scalability and adaptability. 

It boasts dual CPU cores, adjustable clock frequencies, and a rich set of peripherals, including touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C. Connect to your devices via Bluetooth or Wi-Fi, and enjoy a wide physical range and direct internet connection with power consumption under 5µA, it’s perfect for wearable electronics and battery-powered applications. Take your IoT projects etc. to the next level with this exceptional board. 

ESP32 Development board is based on the ESP32-WROOM-32E Module, which consists of ESP32 series microcontroller from ESPRESSIF. It is a Wi-Fi + Bluetooth + BLE development board. The module has a 32-Bit Dual Core MCU, ultra-low power, based on 40 nm. technology.

The module supports 802.11 b/g/n along with Bluetooth v4.2 BR/EDR and BLE specification. It has integrated 4/8/16 MB Flash, and up to 512 KB RAM. It can operate at up to 240 MHz Frequency. 

The ESP32 Development board is 30 pin board, with all of the interfaces accessible. It sports a Type-C USB Connector, and USB to UART Bridge, reset and boot mode buttons, and an LDO regulator. Most of the important GPIOs are accessible on board. 

This board is useful to add high-capacity Wi-Fi, Bluetooth or BLE in any existing projects very rapidly. It also supports Lua scripting language, thereby making it easier to develop for the developers. 

ESP32 (CP2102 Driver, 30 Pin) Wi-Fi + Bluetooth NodeMCU-32 Development Board) 

This development board is a powerhouse of power and connectivity. With robust Wi-Fi and Bluetooth capabilities, it opens up a world of possibilities. Its compact 30-pin design allows it to seamlessly integrate into various products, enabling endless creative options. What sets this board apart are its dual wireless modes. 

You can choose between AP, STA, or AP+STA modes, giving you the flexibility you need for your IoT endeavors. The inclusion of Lua programming support makes development a breeze, catering to both beginners and experts. For smooth computer connectivity, the board features a CP2102 USB-UART bridge, ensuring that you can work effortlessly with your computer. At the heart of this development board lies the powerful ESP32 chip, designed for scalability and adaptability. 

It boasts dual CPU cores, adjustable clock frequencies, and a rich set of peripherals, including touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C. Connect to your devices via Bluetooth or Wi-Fi, and enjoy a wide physical range and direct internet connection with power consumption under 5µA, it’s perfect for wearable electronics and battery-powered applications. 

ESP32 Development board is based on the ESP32-WROOM-32U Module, which consists of ESP32 series microcontroller from ESPRESSIF. It is a Wi-Fi + Bluetooth + BLE development board. The module has a 32-Bit Dual Core MCU, ultra-low power, based on 40 nm. technology. The module supports 802.11 b/g/n along with Bluetooth v4.2 BR/EDR and BLE specification. It has integrated 4/8/16 MB Flash, and up to 512 KB RAM. It can operate at up to 240 MHz Frequency. 

The ESP32 Development board is 30 pin board, with all of the interfaces accessible. It sports a Type-C USB Connector, and USB to UART Bridge, reset and boot mode buttons, and an LDO regulator. Most of the important GPIOs are accessible on board. 

This board is useful to add high-capacity Wi-Fi, Bluetooth or BLE in any existing projects very rapidly. It also supports Lua scripting language, thereby making it easier to develop for the developers

The HC-12 433 SI4463 wireless serial module is a low-power wireless transceiver module operating in the 433.4-473.0MHz band. It is based on the SI4463 RF chip, which supports up to 100mW transmit power and has a range of up to 1 kilometer in open space.

The HC-12 module has a built-in MCU and can be used as a transparent serial port. It supports a variety of serial protocols and has a maximum baud rate of 115200bps. It also supports multi-channel transmission and reception, allowing up to 100 HC-12 modules to communicate with each other simultaneously.

The module operates on a voltage range of 3.2-5.5V and has a current consumption of less than 100mA during transmission. It also has a sleep mode to conserve power when not in use. The HC-12 module can be used in a variety of applications such as wireless data transmission, remote control, telemetry, and more.

Description: RFM75 is a low-power, high-speed FSK/GFSK transceiver module specifically operating in the world wide ISM frequency band at 2400 - 2483.5 MHz. RFM75 module features low cost, small size, high stability and good consistency. The maximum air data rate can be up to 2Mbps. It can be widely applied in various wireless connections in daily life or activities. It is compliant with the specifications regulated and required by FCC and ETSI.

Additional Information:

• Item Code: RFM75

A wireless transceiver module is a compact electronic device that combines both transmission (sending) and reception (receiving) capabilities for wireless communication. It allows devices to wirelessly exchange data and communicate with each other over a specific frequency or wireless protocol.

Here is a general description of a wireless transceiver module:

1. Functionality: A wireless transceiver module integrates both a transmitter and a receiver in a single package. It enables bidirectional communication by transmitting data from one device and receiving data from another device simultaneously.

2. Wireless Protocols: The module may support various wireless protocols, such as Wi-Fi (IEEE 802.11), Bluetooth, Zigbee, LoRa, RF (Radio Frequency), or other proprietary protocols. The choice of protocol depends on the application requirements, range, data rate, and power consumption considerations.

3. Frequency Range: The module operates within a specific frequency range designated by the wireless protocol it supports. Common frequency bands include 2.4 GHz and 5 GHz for Wi-Fi, 2.4 GHz for Bluetooth, and various frequencies for other wireless standards.

4. Data Rate: The module's data rate specifies the speed at which it can transmit and receive data wirelessly. Different modules offer varying data rates depending on the protocol and implementation, ranging from kilobits per second (Kbps) to multiple gigabits per second (Gbps).

5. Range: The range of a wireless transceiver module refers to the maximum distance over which it can effectively transmit and receive data. The range depends on factors such as transmit power, environmental conditions, obstacles, and interference. It can vary from a few meters to several kilometers, depending on the wireless protocol and the module's design.

6. Antenna: The module incorporates an antenna or a connector to attach an external antenna for efficient wireless communication. The antenna plays a crucial role in transmitting and receiving signals, and its design impacts the range and performance of the module.

7. Integration and Interface: The wireless transceiver module may have additional integrated components, such as microcontrollers, memory, or peripheral interfaces (e.g., UART, SPI, I2C), to facilitate easy integration with other devices or systems.

8. Power Requirements: Wireless transceiver modules require a power supply to operate. They typically have specific power requirements in terms of voltage and current consumption, which may vary depending on the module and the wireless protocol it supports.

9. Regulatory Compliance: Wireless transceiver modules often need to comply with regulatory standards, such as FCC (Federal Communications Commission) regulations in the United States or CE (Conformité Européene) standards in Europe. Compliance ensures that the module operates within specific guidelines regarding frequency usage, transmit power, and interference prevention.

Wireless transceiver modules find applications in various fields, including Internet of Things (IoT) devices, smart home automation, wireless sensors, remote control systems, wireless audio/video transmission, and many other wireless communication scenarios. The specific features, capabilities, and characteristics of a wireless transceiver module can vary depending on the manufacturer, model, and intended application.

• Supports direct connection to the PC on main boards
• Easy-to-use and simple
• Precisely developed

Description: Wireless RF Module CC2500 2.4GHz options is suitable for delivering clear channel assessment, data buffering, wake on radio, burst transmissions, link quality indication. Further, it comes with option of Manchester coding of data stream by modulator and decoded by demodulator. Some of its end usage areas include Consumer Electronics, Wireless audio & game controllers as well as in other wireless systems. Some of its working specifications include low current consumption, efficient SPI interface, operating temperature range from -40 to 85, available frequency of 2.4 to 2.483 GHz, Hi sensitivity of -101dBm @10kbps among others. CC2500 2.4GHz have powerful digital features also support building high-performance RF system support.

Features:

• Low power consumption.
• Integrated bit synchronizer.
• Integrated IF and data filters.
• Programmable output power -20dBm~1dBm
• Operation voltage: 1.8~3.6 Volts.
• Digital RSSI

The ESP8266 ESP32 WiFi Bluetooth development board is a development board based on the ESP32 chip, which integrates WiFi and Bluetooth connectivity. It is designed for Internet of Things (IoT) applications and is widely used in various IoT projects due to its low cost, low power consumption, and wireless connectivity.

The ESP32 chip has a dual-core Tensilica LX6 CPU with a clock speed of up to 240MHz, 520KB of SRAM, 4MB of flash memory for program storage, and a wide range of peripheral interfaces, such as SPI, I2C, UART, and PWM. It also has built-in WiFi and Bluetooth connectivity, which allows the module to connect to the internet and communicate with other devices wirelessly.

The development board based on the ESP32 chip usually comes with a variety of peripherals, including buttons, LEDs, sensors, and interfaces, such as USB and microSD. It also has a built-in programming interface that allows the module to be programmed and updated easily.

The ESP8266 ESP32 WiFi Bluetooth development board can be programmed using the Arduino IDE or other development environments using the ESP32 core libraries. It is widely used in various IoT applications, such as home automation, smart appliances, and industrial control systems, due to its powerful features, low cost, low power consumption, and wireless connectivity.

• Automotive diagnostics units
• Hand held terminals
• Smooth performance

The HC-06 Bluetooth module breakout board is a convenient way to interface with the HC-06 Bluetooth module, which is a popular Bluetooth module for wireless communication. The breakout board simplifies the connections and provides an easy-to-use interface for integrating the HC-06 module into your projects. Here's a description of the HC-06 Bluetooth module breakout board:

1. HC-06 Bluetooth Module: The breakout board is designed specifically for the HC-06 Bluetooth module. The HC-06 module is a Bluetooth 2.0 module that supports the Serial Port Profile (SPP) for transparent serial communication over Bluetooth.

2. Breakout Board Design: The breakout board typically features a small PCB (Printed Circuit Board) with headers or solder pads for easy connection and integration. It may include voltage regulators, level shifters, or other components to ensure proper communication between the module and your microcontroller or other devices.

3. Power Supply: The HC-06 Bluetooth module breakout board is usually powered by a 3.3V power supply. It may have voltage regulators onboard to provide the required voltage for the HC-06 module, allowing you to power it directly from a higher voltage source.

4. Serial Communication: The breakout board provides serial communication interfaces, such as UART (Universal Asynchronous Receiver-Transmitter) or TTL-level serial pins, to connect the HC-06 module to your microcontroller or other devices. These pins facilitate the exchange of data between the module and your project.

5. LED Indicators: Some breakout boards include LED indicators to provide visual feedback on the Bluetooth module's status. These LEDs may indicate power status, Bluetooth connection status, or data transmission activity.

6. Configuration Pins: The HC-06 module usually has a few configuration pins, such as key pin or state pin, that allow you to enter AT command mode or control certain functionalities of the module. The breakout board may expose these pins for easy access and configuration.

7. Pairing Button: In some breakout boards, a pairing button is included to initiate the pairing process or enter the discoverable mode of the HC-06 module. Pressing the button puts the module into a state where it can be discovered and connected by other Bluetooth devices.

8. Antenna Connection: The breakout board may provide an antenna connection for connecting an external antenna to improve the Bluetooth module's wireless range and signal strength.

9. Compatibility: The HC-06 Bluetooth module breakout board is compatible with various microcontrollers, such as Arduino, Raspberry Pi, and other development boards. It can be easily integrated into your existing projects or used as a standalone Bluetooth module.

The HC-06 Bluetooth module breakout board simplifies the process of using the HC-06 module by providing a user-friendly interface and easy connections. It allows you to establish Bluetooth communication between your project and other Bluetooth-enabled devices, opening up possibilities for wireless control, data transfer, and communication in your applications.

The HC-05 Bluetooth module is a commonly used Bluetooth serial communication module. It is based on the Bluetooth 2.0+EDR (Enhanced Data Rate) protocol and is designed to be easy to use and integrate with microcontrollers and other devices.

The HC-05 module has a built-in Bluetooth protocol stack and can communicate with smartphones, tablets, and other devices that support Bluetooth. It also has a serial interface, which can be used to communicate with microcontrollers and other devices that do not have built-in Bluetooth capabilities.

The module has a range of up to 10 meters and can operate on a voltage range of 3.6-6V. It supports various baud rates, ranging from 1.2Kbps to 138Kbps, depending on the mode of operation. The HC-05 module can be configured using AT commands, allowing it to be customized for specific applications.

The HC-05 module is commonly used in various applications such as wireless data transfer, remote control, and sensor networks. It is a cost-effective and reliable solution for Bluetooth communication between devices.

The HC-05 Bluetooth Module Breakout Board is a circuit board that is designed to allow users to easily connect and use the HC-05 Bluetooth module in their projects. The breakout board includes the HC-05 module, as well as the necessary circuitry to allow it to communicate with other devices using Bluetooth.

The HC-05 module is a popular Bluetooth module that can be used for a variety of applications, such as wireless data transfer, remote control, and communication between microcontrollers. The module is designed to be easy to use and is compatible with a wide range of devices, including smartphones, tablets, and computers.

The breakout board makes it easy to connect the HC-05 module to a microcontroller or other device, as it includes the necessary power and communication pins. Additionally, the breakout board often includes other features, such as status LEDs or voltage regulators, which can make it even more convenient to use.

Overall, the HC-05 Bluetooth Module Breakout Board is a versatile and convenient tool for anyone who wants to incorporate Bluetooth connectivity into their projects. Whether you're building a robot, creating a wireless sensor network, or just experimenting with wireless communication, the HC-05 breakout board can help make your project a success.

• I2C interface
• Max I2C Speed: 3.5MHz
• Very low noise - up to 0.02hPa (17cm)
• Full calibrated

Description: HC-05 is a class-2 bluetooth module with Serial Port Profile, which can configure as either Master or slave. a Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU, PC to your embedded project and etc.

Additional Information:

• Item Code: HC-05

Specifications:

It's a useful tool for gardening.

Used to measure soil PH, humidity and light.

“MOIST” key is correspondent to MOIST on the table. 1-3 (red part) indicate watering needed, 4-7 (green part) indicate water suitable, 8-10 (blue part) indicate too wet.Please adjust watering time according to plant species.

“PH” key is correspondent to PH 8-3.5 on the table. 7 indicate neutral, the lower the value is, the higher the acidity is. Please adjust soil acidity according to plant species.

“LIGHT” key is 0-2000 lumen. The higher the value is, the stronger the light is. Please determine the need for shade according to plant species.

Note: prohibit to probe into water directly; Not insert in the soil for a long time to use.

Size: 290 * 50 * 38mm approx

Probe length: 200mm approx

Weight: 90g approx

Features:

The tool plant owners, gardeners can't live without!

3 IN 1: Moisture, Light PH meter Soil analyzer meter.

For outdoor indoor plants, gardens grass lawn.

Take the guess work out of your daily garden watering light and moisture.

Save water, energy and keep your plants, lawn, flower in top condition.

Measures moisture at root level.

Prevents over and under watering

Scientifically accurate.

Easy to use, just insert and read.

No battery required, simple and convenient to use

Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.

• On-board MPU - 6050 integrated 6 axis motion processing chip.
• On-board LDO chip, support 5V / 3.3V voltage input.
• Commonly used pin have eduction, pin have standard 2.54 mm spacing.
• Module support IIC standard communication protocol for easy interfacing.
• 16 bit AD converter that can generate 16 bits of data output.
• Users can control the accelerator sensor range within 2g, 4g, 8g and 16g.
• Angular velocity, Sensing range: 250 500 1000 and 2000 / SEC (DPS)

The ADS1115 ADC low power module is a small module that utilizes the ADS1115 analog-to-digital converter (ADC) chip. It is designed to provide high-precision analog-to-digital conversion for a wide range of applications, such as temperature sensing, pressure measurement, and data acquisition.

The ADS1115 chip is a 16-bit ADC with a maximum sampling rate of 860 samples per second (SPS). It has four input channels that can be configured for single-ended or differential measurements, and it supports a wide range of input voltages from -0.3V to +5.5V. It also has built-in programmable gain amplifiers (PGA) that can amplify the input signal by up to 16 times, which allows it to measure small signals with high precision.

The ADS1115 ADC low power module usually comes with a small PCB that includes the ADS1115 chip, power regulation circuitry, and interface components, such as I2C communication lines and power supply pins. The module can be powered by a wide range of input voltages, typically from 2V to 5.5V, and it consumes very low power, making it ideal for battery-powered applications.

The ADS1115 ADC low power module can be easily interfaced with microcontrollers, such as Arduino and Raspberry Pi, using the I2C interface. It also comes with libraries and examples that allow users to easily integrate the module into their projects. Overall, the ADS1115 ADC low power module is a useful tool for high-precision analog-to-digital conversion in a variety of applications that require low power consumption and high accuracy.