Dilson Enterprises

Hi-Link DC/DC series-1D1215  

Features :  HLK-1D1215 power module

1. Ultra-miniature standard package SIP package and standard pins
2. Constant voltage input, isolated unregulated single output, 1W
3. Input and output isolation withstand voltage 1500VDC
4. Low ripple/noise (20MH bandwidth) < 100mVp-p

Applications:  HLK-1D1215 power module

• Can be used in Medical, industrial control, electric power, instrumentation, communication, railway

Hi-Link B1212S-1WR3 DC power supply module 1D1212 DC-DC isolation module 12V to 12V1W isolation module.This module transforms 12V input to 12V output with a 1W power capacity. Featuring isolation capabilities, it ensures electrical separation for enhanced safety. With a small form factor, it is ideal for various applications requiring reliable and isolated power delivery in a 12V environment.

Features:

1. Isolation Voltage: 1500V DC between input and output
2. Operating Temperature Range: -40°C to +105°C
3. Package: Compact SIP (Single Inline Package) for space-saving designs
4. Protection Features: Continuous short-circuit protection with self-recovery
5. Efficiency: High efficiency, reducing heat generation and improving reliability
6. Compliance: RoHS compliant, meeting environmental and safety standards

Overview / General DescriptionThe F0505S‑2WR3 is a 2 W, isolated DC‑DC converter module in SIP (Single Inline Package) form.
“Fixed voltage input, isolated non‑regulated output” — i.e. it provides an isolated output but the output is not tightly regulated; load and input variations will cause output variation.
It is designed for use where an isolated voltage is required (e.g. separation between circuits) and where high output precision is not critical (e.g. digital logic, relay drive, signal isolation) 
Compact size, low idle consumption, and built‑in protection (short circuit, thermal) are features.

Overview & Features

• Type: Isolated DC‑DC converter module
• Power rating: ~2 W output
• Input: Fixed (regulated) input voltage (nominal)
• Output: Single output, non‑regulated (i.e., no internal regulation, isolated from input)
• Isolation: High voltage isolation between input and output
• Efficiency: Relatively high for such a module
• Low no‑load consumption
• Protection: Short circuit (sustainable / auto recovery)
• Operating temperature: Wide range
• Compact SIP module

The Hi-Link F2405S-1WR3 is a DC-DC isolated converter module designed to provide a stable 5V DC output from an input voltage range of 18V to 36V DC. This module is ideal for applications that require electrical isolation between the input and output, offering 1500V DC isolation to protect sensitive circuits from electrical noise, voltage spikes, and transients.
With a 1W power output, the F2405S-1WR3 is designed to efficiently power low-power electronics, such as microcontrollers, sensors, and communication devices, while offering compact size, high efficiency, and built-in protection features like overload, short-circuit, and over-temperature protection. This module is suitable for a variety of applications, including industrial control systems, embedded systems, and automotive electronics.

Features:-

• Wide Input Voltage Range: The F2405S-1WR3 operates within an input voltage range of 18V to 36V DC, which makes it suitable for various industrial power sources, automotive applications, and battery-powered devices with fluctuating input voltages.
• Stable 5V Output: It provides a reliable 5V DC output, ideal for powering microcontrollers, sensors, communication modules, and other low-power devices that require a stable power supply.
• Isolated Design: The 1500V DC isolation ensures electrical separation between the input and output, providing essential protection for sensitive circuits against electrical noise and spikes.
• High Efficiency: The F2405S-1WR3 operates with an efficiency of 85% to 90%, minimizing energy loss and heat generation, contributing to the overall reliability and longevity of the system.
• Compact Size: The module comes in a compact form factor (39mm x 24.5mm), making it easy to integrate into space-constrained applications.
• Built-in Protection: The module includes overcurrent, over-temperature, and short-circuit protection, which ensures safe operation and safeguards both the module and connected devices.
• Low Ripple & Noise: The output has low ripple and noise (< 100mV), providing clean and stable power for sensitive electronics that require precise voltage regulation.

Applications:-

• Embedded Systems: The F2405S-1WR3 is ideal for powering 5V DC embedded systems, microcontrollers, sensors, and other low-power electronics that require stable and clean power.
• Industrial Control Systems: Suitable for applications where a 5V DC isolated power source is needed for controlling and powering sensors, actuators, and other industrial equipment.
• Automotive Electronics: This module is ideal for automotive applications, where the input voltage may fluctuate. It ensures a stable 5V DC output to power automotive devices, sensors, and control systems.
• Communication Equipment: The module is suitable for powering communication modules, wireless devices, and networking equipment that require a stable and isolated 5V DC power source.
• Battery-Powered Systems: The F2405S-1WR3 can be used in battery-powered systems, providing a stable 5V DC output even with fluctuating input voltage.

The Hi-Link F2412S-1WR3 is a DC-DC isolated converter module designed to provide a stable 12V DC output from an input voltage range of 18V to 36V DC. This module is specifically engineered for applications where electrical isolation between the input and output is required, offering a 1500V DC isolation to protect sensitive electronics from voltage spikes, electrical noise, and transients.
With a 1W power output, the F2412S-1WR3 is ideal for powering low-power electronics such as sensors, microcontrollers, and communication devices. It features high efficiency, a compact design, and built-in overload, short-circuit, and over-temperature protection, ensuring safe and reliable operation in demanding environments.

Features:-

• Wide Input Voltage Range: The F2412S-1WR3 operates within an input voltage range of 18V to 36V DC, making it suitable for various industrial, automotive, and battery-powered systems with fluctuating input voltages.
• Stable 12V Output: The module provides a reliable 12V DC output, ideal for powering devices like sensors, microcontrollers, communication modules, and other electronics requiring a stable 12V power source.
• Isolated Design: The 1500V DC isolation ensures electrical separation between the input and output, protecting sensitive equipment from electrical noise, transients, and voltage spikes.
• High Efficiency: The module operates with 85% to 90% efficiency, minimizing power loss and heat generation, which enhances the overall reliability of your system.
• Compact Size: The F2412S-1WR3 is designed in a compact form factor (39mm x 24.5mm), which makes it easy to integrate into tight spaces or small-scale electronic projects.
• Built-in Protection: The module includes overload, short-circuit, and over-temperature protection, ensuring safe and reliable operation in a variety of conditions and preventing damage to the module and connected devices.
• Low Ripple & Noise: With < 100mV ripple and noise, the F2412S-1WR3 delivers a clean and stable 12V DC output, which is crucial for sensitive applications where a smooth and noise-free power supply is required.

Applications:-

• Embedded Systems: The F2412S-1WR3 is perfect for powering 12V DC embedded systems, microcontrollers, sensors, and other low-power electronics that require stable and isolated power.
• Industrial Control Systems: This module is suitable for industrial applications that require a stable and isolated 12V DC power source for sensors, actuators, and control systems.
• Automotive Electronics: The F2412S-1WR3 can be used in automotive systems to provide a stable 12V DC output, even when input voltage fluctuates, to power automotive control circuits and sensors.
• Communication Equipment: The module is ideal for powering communication modules, wireless devices, and networking equipment that require a 12V DC power source.
• Battery-Powered Systems: The F2412S-1WR3 is suitable for battery-powered applications where a 12V DC output is needed and the input voltage may vary.