|Frequency||2400 - 2483.5 MHz|
Description: RFM75 is a low-power, high-speed FSK/GFSK transceiver module specifically operating in the world wide ISM frequency band at 2400 - 2483.5 MHz. RFM75 module features low cost, small size, high stability and good consistency. The maximum air data rate can be up to 2Mbps. It can be widely applied in various wireless connections in daily life or activities. It is compliant with the specifications regulated and required by FCC and ETSI.
|Minimum Order Quantity||1 Piece|
|Supply Voltage||2.7 to 3.6 V|
|Transmit Power||63 mW (+18 dBm)|
|Data Rate||250 Kbps|
This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. Please refer to the XBee/XBee-PRO ZB (S2C) product manual for more information.
3.3V @ 120mA
2.7V-3.6V working voltage
250kbps Max data rate
63mW output (+17dBm)
1 mile (1600m) range
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
Local or over-air configuration
AT or API command set
External Antenna RequiredRequest
|Air data rate||Up to 2Mbps|
Description: Wireless RF Module CC2500 2.4GHz options is suitable for delivering clear channel assessment, data buffering, wake on radio, burst transmissions, link quality indication. Further, it comes with option of Manchester coding of data stream by modulator and decoded by demodulator. Some of its end usage areas include Consumer Electronics, Wireless audio & game controllers as well as in other wireless systems. Some of its working specifications include low current consumption, efficient SPI interface, operating temperature range from -40 to 85, available frequency of 2.4 to 2.483 GHz, Hi sensitivity of -101dBm @10kbps among others. CC2500 2.4GHz have powerful digital features also support building high-performance RF system support.
|Outdoor range||300 feet|
|Indoor range||100 feet|
|Data rate||250 Kbps|
Description: This is the Xbee 1mW Wire Antenna - Series 1 XB24-AWI-001 module from Digi. It is Easy to use. Just power up and start communicating. Digi XBee 802.15.4 modules are the easiest-to-use, most reliable and cost-effective RF devices we’ve experienced. The 802.15.4 XBee modules provide two friendly modes of communication – a simple serial method of transmit/receive or a framed mode providing advanced features. XBees are ready to use out of the package, or they can be configured through the X-CTU utility or from your microcontroller. These modules can communicate point to point, from one point to a PC, or in a mesh network.
You only need to choose an antenna style (PCB or wire) and power level (1 mW for up to 300 ft). The PCB antenna version provides a lower profile footprint for applications with limited space while the wire antenna version allows for more flexibility in adjusting for optimal range at the same output power.
Note: Only series 1 modules can work with series 1 type modules you cannot mix up series 1 and series 2 modules to setup communication.
NRF24L01P + PA + LNA wireless module core Norway NORDIC company''s latest high-performance wireless
Digital transmission chip NRF24L01 + with the Division of Professional Design professional full two-way RF power amplifier high power PA and LNA chip, RF switches, bandpass filters, etc., makes effective communication distance greatly expand.
RF part, the Secretary has done a lot of optimization matching debugging, the emission efficiency to achieve the highest harmonic minimum
NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches a minimum, while not susceptible to interference from other devices, greatly Uploader
High stability of the work.
NRF24L01P + PA + LNA wireless module integration is extremely high, the size of only 41mm * 15.5mm, convenient embed.
|Minimum Order Quantity||1 Piece|
|Supply Voltage||2.7 to 3.6V|
Bee Pro 63mW RPSMA - Series 2C (ZigBee Mesh) is ZigBee RF modules provide cost effective wireless connectivity to electronic devices. They are interoperable with other ZigBee PRO feature set devices. Embedded ZigBee RF modules provide OEMs with a simple way to integrate mesh technology into their application. The XBee-PRO ZigBee RF Modules provide wireless connectivity to end-point devices in ZigBee mesh networks. Using the ZigBee PRO Feature Set, these modules are inter-operable with other ZigBee devices. With the XBee, users can have their ZigBee network up-and-running in a matter of minutes without configuration or additional development.
XBee and XBee-PRO ZigBee modules are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market. Products in the XBee family require little to no configuration or additional development. Programmable versions of the XBee and XBee-PRO ZigBee module make customizing applications easy. Programming directly on the module eliminates the need for a separate processor. Because the wireless software is isolated, applications can be developed with no risk to RF performance or security.